While there are few truly wrong ways to light a fire, there are a number of fire starting techniques that can make lighting a fireplace fire easier and more efficient. Follow these five easy steps to help learn how to light your best ever fires in your fireplace this winter.
Have your fireplace swept and inspected each year. Whether you use your fireplace every day or only a few times per year, every chimney needs to be swept and inspected annually. This prevents buildup and blockages in the flue, as well as helps spot damage or deterioration before it causes major fireplace performance problems.
Use the right firewood. The kind of firewood you use in your fires can have a major impact on fireplace performance. Firewood should be cut, stacked, and seasoned for at least a year to remove moisture content from the wood, helping it burn hotter and produce less smoke and creosote. Hardwoods such as ash, beech, cedar, maple, and oak burn hotter, more efficiently, and with less smoke; softwoods such as firs, pines, and spruces should be avoided in indoor fires. Likewise, woods from fruit trees such as cherry, apple, or plum are known for their pleasant aroma and can be used to create a pleasant smelling fire.
Warm the flue. Before lighting even the kindling, make sure the damper is completely open. Opening the damper prevents smoke and gas from blowing back into your home. After opening the damper, there may be a rush of cold air for a few moments; if this downward draft of cold air continues for more than a few minutes, try warming the flue. Light rolled up newspaper and hold it directly below the damper. Doing this creates enough warm air to stop downdrafts without creating large amounts of smoke that can be blown back into your home.
Start with kindling before adding wood. At the bottom of the grate, place rolled up lint, newspaper, or other fire starting aids between two large pieces of kindling wood. Create a second row of kindling lengthwise over the first stacked at a 90 degree angle; continue this until you have 3-4 rows of alternately-stacked kindling. Light the kindling from the newspaper at the bottom.
Add logs after the kindling has ignited. Once the kindling is well-lit, begin adding firewood logs. Begin by placing 2 smaller, split logs onto the kindling; after 10 minutes, continue adding additional logs. Most smaller logs take between 5-15 minutes to burn; larger logs can burn for longer amounts of time, but also take longer to ignite. Try to add your next logs while the fire is still actively burning as adding wood on top of glowing charcoals or embers can be extremely difficult to ignite.
Contact Jack Pixley Sweeps
Following these steps to light your next fireplace fire can help ensure you have a fire that burns safer, more efficiently, longer, and with less smoke. For more information on the best way to start a fire in your fireplace, contact the chimney experts at Jack Pixley Sweeps today!